|
|
|
|
|
|
|
|
|
|
|
|
| Product Name: | Evolution Programmer |
| Manufacturer: | Edge Products |
| Part Number: | 15001 |
KEY FEATURES
• FIRST PROGRAMMER TO READ AND DISPLAY EGTs, probe included
• Provides in-cab display to monitor vital engine functions
• Additional 100 HP and 200 ft. lbs of torque
• Three power levels
• Ships with a custom designed pod
• Internet updateable (cable included)
• Displays and clear diagnostic trouble codes
• Adjustable LED backlight color
• Does 0-60 and Quarter mile performance tests with the drag strip Christmas
tree lighting and reaction times
• Displays Alerts and Records such as RPM, MPH and EGT
• Datalogs vital engine information
• Simple installation
ADVANCED TUNING
• Able to adjust shift points/pressure
• Adjustable speed/rev limiter
PERFORMANCE TESTING
• 0-60 and Quarter mile performance tests with the drag strip Christmas tree
lighting and reaction times
DATA STREAM
• Records 5 parameters for up to 60 seconds
PIDS
The Evolution allows the user to view up to 4 PIDs at one time. There are 11
different PIDs to choose from. Below is a list and description of each:
• RPM (revolutions per minute) – Engine speed.
• MPH (miles per hour) – Note: Dash display may be +/-3 MPH off from the digital
display due to mechanical differences in the spring, etc. used to control the
gauge.
• BST (Boost Pressure) - PSI
• EGT (Exhaust Gas Temp) – Degrees F.
• EOT (Engine oil temperature) – Degrees F.
• TFT (Transmission fluid temperature) – Degrees F. (Automatic Trans ONLY. If
you have a manual trans, the value displayed will be incorrect)
• IAT (Intake air temperature) – Degrees F.
• BARO (Barometric pressure) – PSI
• BAT (Battery voltage)
• DTC (Diagnostic trouble code count)
The following power gains are representative of an actual test vehicle. These
gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level,
and represent power delivered to the rear wheels of the test truck. The only
modification made to the test truck was the addition of the Edge Evolution module.
Power gains may vary based on vehicle and geographical location.
Level 1: 60 Horsepower - 100 Foot Pounds of Torque
Level 2: 80 Horsepower - 140 Foot Pounds of Torque
Level 3: 100 Horsepower - 200 Foot Pounds of Torque
Have an old Evolution? Do you want to upgrade? Call Edge's tech support to upgrade
at a discounted price.
Not legal for sale or use in California on pollution-controlled motor vehicles.
CAUTION!
Your Evolution programmer has the ability to remove/adjust your vehicle’s factory
speed limiter. Removal/adjustment of the factory speed limiter is intended for
use at a closed circuit, legally sanctioned racing environment. Even if racing
in a legally sanctioned racing environment, it is your responsibility to ensure
your tires and other vehicle components are rated to travel at increased speeds
with the speed limiter removed/adjusted. If you remove/adjust the speed limiter
during highway driving, it is your responsibility to obey all driving laws, including
adhering to posted speed limits. Removing/adjusting the speed limiter for purposes
inconsistent with the product's intended function, as stated herein, is a violation
of the product’s intended use and invalidates the product's warranty. Edge Products
is not responsible for, or liable for the consequences of improper product use.
|
|
|
|
|
 |
| Applications: |
| 1999-2003 Ford F-250 Super Duty 7.3L Powerstroke Diesel |
| 1999-2003 Ford F-350 Super Duty 7.3L Powerstroke Diesel |
| 1999-2003 Ford F-550 Super Duty 7.3L Powerstroke Diesel |
| 1999-2003 Ford F-450 Super Duty 7.3L Powerstroke Diesel |
|
|
|
|
 Important Notes!
- Don't forget to check the manufacturer's website to get the latest updates for your programmer.
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
